Infrared System Irida HTS/1
Diffusion of color and temperature
It’s a classic infrared heater with modern design made by aluminum anodised cast, thus yielding at us twice as much energy of infrared radiation produced by Elstein ceramic emitters, retaining its’ color and structure over time, with low acquisition costs and immediate payback without any maintenance costs.
In 400x120mm dimensions has the ability to heat spaces up to 20m² only in 1000W rated power. It can be armed by two different possible types of ceramic emitters, the longest-serving FSR 250x60mm 750 °C, in 400W, 650W, the 1000W /230V or the energy-efficient HTS / 1 250x60mm offering 20% more thermal energy which reaches 900 ° C at 600W, 800W, the 1000W 230V. With usage time 20.000 hours.
The combination of fast (7min) and high temperature (900 ° C) at low power (watt), producing the ceramic emitters of Elstein, allow our devices to quickly recover the temperature of a space, even in extreme cold conditions and humidity, without requiring the 24 hour operation, thus providing the maximum economy in consumption of electricity.
The series Irida was designed for easy use by everyone, for our security and economy of power seeking. With the above criteria , our company Mica Electric Heaters has built two different models which in no way allow our devices to develop internal temperatures above 200 °C. A range of security thermostats is routed to interrupt its’ operation so there is no unnecessary use of electricity and prevent accidents during use, describing it as energy efficiency A.
These are :
Type ‘S’ was designed for our safety and has a built in safety thermostat, operating at 180 ° C and a second safety thermostat at 200 °C without restoring. The control on-off operation as also the temperature in your space is controled by a third external thermostat at 10-30 ° C accompanying the device and allow one or more of them to maintain a constant temperature of a room or the entire house according to the needs.
Type ‘T’ was also secured internally with a configuration variable operating thermostat from 30-200 °C with an outer clear plastic wand rotation rating scale from 0 to 6 which allows us to define the temperature of the device resulting the approximate temperature of the place that is installed. The apparatus has a bipolar pulled 16Amp switch on off with cord that allows us independently and voluntarily use this or not . The type ‘ T’ except from the permanent installation on the wall does not need any external or internal electrical wiring, making it easy to carry the device in the future.
In front of it, there is a suitably shaped external distinctive mesh, that protects the user from any objects that may pass in front of the heater during its’ operation.
An invisible strong horizontal mounting base (foil thickness 4mm) which accompanying the device, has up to three different points for a permanent support to the wall, while offering the possibility of regulating the angle of the device from 0 to 45 °.
Devices accompany CE certificate according to EN555014 -1: 2006 & EN62233: 2008.
Instructions for installation and use.
Warranty 3 years .